利用计算机辅助装调检测矩形大口径离轴非球面的方法研究

通过非球面的零位补偿法,完成了对矩形大口径离轴非球面镜的检测。先用光学设计软件Zemax从理论上分析了在检测中会出现的现象,并结合计算机辅助装调技术,确定在检测过程中相对敏感的自由度,然后控制这些量,使补偿器和非球面的相对关系与理论设计相吻合,在Zygo相位干涉仪上测得最终结果。在λ=632.8nm时,中心圆口径与两个边缘圆口径面形误差RMS分别为0.022λ,0.037λ,0.032λ。检测结果,达到预期目的。     

压电陶瓷压电特性的激光调制法测量研究

介绍可测量压电陶瓷压电特性的激光干涉调制测量方法.采用相干检测原理对信号进行提取,不仅可以抑制噪声对干涉信号的影响,而且还可以大大降低光电探测器和电路的1/f噪声.与通常干涉仪测量方法相比,这种方法具有测量灵敏度高等优点.利用该方法对压电陶瓷压电特性进行了测量,讨论了激励电压信号的频率、幅度对压电陶瓷压电常数d₃₁的影响,并对其压电迟滞曲线进行了测量.     

Development of a Millimeter Wave Compact Equipment for NDT of Materials

We developed a compact equipment working at 94 GHz to replace the commonly used network analyzer for nondestructive testing of materials. The compact equipment was designed to measure the variations in the amplitude and phase of the reflected signal from the material relative to a reference signal. A good accuracy of the amplitude and phase measurement of the equipment was obtained in the confirmative experiments. The distribution of a drop of water in a wood plate is clearly visible in the millimeter wave images obtained by the amplitude and phase measurement.     

基于分层光学扫描的三维数字化测量技术

采用切削分层光扫描测量与计算机数据信息合成相结合的方法，有效地解决了具有复杂内外腔结构零件的三维数字化测量。该方法比传统三维测量速度快、自动化程度高，能同时准确测量零件内外腔表面，零件边缘测量误差可控制在CCD两个像素内。利用获取的铝合金精密小箱体三维数据，在计算机上重构了零件的三维模型，并用RP技术制造出了零件物理原形。     

汉字识别的加工模型

通过文献分析,概述了认知心理学关于汉字识别过程及其加工机制研究的几种主要的加工模型,即经成分识别模型、多层次交互激活模型、连接主义模型、合体汉字字形识别模型和汉字识别的多层次格式塔双向加工模型.     

用光学差分吸收光谱监测大气中污染气体浓度

在实验室内模拟测量了实际大气中污染气体的差分吸收光谱 (DOAS) .本文在介绍差分吸收光谱技术同时 ,分析计算了污染气体的浓度 .实验设计中被测气体为大气中的 2种主要污染气体 :工业锅炉的主要排放物SO2 和机动车尾气的主要成分NO .用氘灯作为光源测量其在紫外波段的特征吸收 ,并通过光纤束连接光栅光谱仪 ,由计算机自动采集和处理数据 .     

The modified characteristic finite difference fractional steps method for the coupled system of fluid dynamics in porous media and its analysis

For the coupled system of multilayer fluid dynamics in porous media, the modified characteristic finite difference fractional steps method applicable to parallel arithmetic is put forward and two‐dimensional and three‐dimensional schemes are used to form a complete set. Some techniques, such as calculus of variations, energy method, piecewise biquadratic interpolation, multiplicative commutation rule of difference operators, decomposition of high order difference operators and prior estimates are adopted. Optimal order estimates in L² norm are derived to determine the error in the approximate solution. This method has already been applied to the numerical simulation of multilayer fluid dynamics in porous media. © 2003 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 19: 665–681, 2003.     

On the Buchstaber Subring in MS p

A formula is given to calculate the last n number of symplectic characteristic classes of the tensor product of the vector Spin(3)- and Sp(n)-bundles through its first 2n number of characteristic classes and through characteristic classes of Sp(n)-bundle. An application of this formula is given in symplectic cobordisms and in rings of symplectic cobordisms of generalized quaternion groups.     

偏振小孔干涉仪

偏振小孔干涉仪是一种可实用的新型干涉仪。它综合小孔衍射技术、偏振技术和共光路设计为一体,具有条纹对比度可调、抗干扰能力强和非接触检验等优点,可广泛用于各种光学元件及其胶合层的检验。目测精度达1/10λ,计算机条纹处理精度可调。     

强收敛与弱收敛的微小区别

对于独立同分布随机变量序列{Xn,n≥1},证明了其满足弱大数律的一个必要条件是:对于任何r∈(0,1),E|X|r<∞都成立.另外我们还举例说明了这样的条件不是充分的.